Tuesday, May 20, 2008

Do Gutter Guards Really Work?


A few years ago gutter guards were all the rage. The thought of never having to clean your gutters again is a homeowners dream. We resisted the trend for a while, because we could not see how it was possible that the guards on the market would truly keep the leaves and debris out. Eventually they became so popular that we hopped on the trend.

There were so many different guards to choose from. We decided that we would start out with a product that was very affordable to our customer. It only took a few installs and months to see that our customers were not having great results. Leaves were getting stuck to the "fin like" design and they were a bright metalic aluminum that could be seen from the ground taking away from the aesthetic of the home. We quickly switched to another product which was priced a little higher but looked like it could work. We had great results at first, but a year or so with the system on proved problematic. The product was made of a pvc vinyl that would crack in the winter and the system eventualy clogged.

During the experimental years trying to find the right guard, we installed and uninstalled almost every product on the market. The homeowners called us to remove other companies products, because they no longer returned their calls and refused to back-up their product.


Determined to find the right product we hooked up with a franchise dealer of a "Gutter Helmet, Cap, Reverse-curve System" company mainly because of the sheer amount of advertising produced by these companies and the consumer awareness. If you have ever gotten a price or bought one of these systems you know that the price is very steep. A typical raised ranch would cost the customer between $1,500.00 and $2,200.00. The franchise provided great sales material, including videos, brochures, trade show displays and portable displays. We thought we finally had the product that was not only going to solve the leaf problem forever, but also bring in the sales our company was looking for. The bad news is that this product had too many trade-offs for us to continue offering to our customers. They constantly dripped, leaves got in them, bees loved them, they needed to be screwed into the roof often voiding the roofers warranty, encouraged gigantic icecles and put a deep hole in the customers pockets. We then decided to go back to our original stance that gutter guards don't work.


Then we found The Leaf Relief System. We were invited to a demonstration including free food for a product out of Canada called Leaf Relief. If it was not for the free food we would not have gone, but after seeing the demonstration we decided to give gutter guards one last shot. We have now been installing this system for about 5 years now, and have had great results. Just like other gutter guards we have found that it comes with a small set of trade-offs. On the positive side, it is low profile, does not screw into the roof, and no leaves can get in it. On the down side if a home is surrounded by pine trees or does not get a decent amount of wind, debris can sit on top of the gutter. The good news is the rain still gets through the guard, but you may have to get up on a ladder and clear off the top of the guards from time to time.

So if you are looking for a reliable guard that you cannot see from the ground that is priced affordably, Leaf Relief is the way to go.

Monday, May 19, 2008

Leaky Gutter Corners

Seamless Gutters are popular because they are seamless, meaning they come in one piece no matter how long the length. The advantage to this is visual as well as functional. When there are seams in a gutter they are just potential leaks waiting to happen. The only time there are seams in a seamless gutter is when it comes to corners and miters. Obviously our gutter machines cannot produce gutters that make a right angle so a box miter or strip miter is used to join the two gutters together. If a proper silicone is not used to seal the gutter originally or a spot is missed the result is a leaky gutter. You can try sealing it with a better sealant and even tarring it, but 9 out of 10 times the leak comes back. The best way to ensure that the corner is not going to leak again is to replace it totally or scrape out all the existing silicone and use sandpaper to sand the silicone off leaving only the aluminum. After sanding all the silicone, re-apply a gutter/ window silicone to the corner where the seams are as well as the manufacturers seam. The type of silicone we use is SBR-100.

Sunday, May 18, 2008

The Best Time to Clean gutters

The spring brings lots of customers calling about clogged gutters. They had a fall cleaning and think that they are in the clear until next fall. Unfortunately the spring brings blossoming trees that drop debris and one of the worst offenders are the "helicopters", dropped by maple trees. If you have maple trees you are going to need at least two cleanings per year, one in the spring and another in the fall. In the NY area the best time to clean is the end of May and November just around Thanksgiving.

To learn more go to waterflowgutters.com

Thursday, April 24, 2008

Gutters, Gutters, Gutters


My name is Ryan Parsons and I am co-owner of Water-flow Gutter Solutions with my brother Ken Parsons. Together we are known as "The Brothers That Just Do Gutters." The purpose of this blog is to provide helpful gutter and home improvement tips, industry information, and talk about trends we observe in the industry.